Home » All Patterns » Accessories » Easy Eyeglass Charm Sewing Pattern

Easy Eyeglass Charm Sewing Pattern

Sharing is caring!

Tired of searching for your glasses inside your handbag? Sew this handy eyeglass charm instead! It’s super easy to use—just snap it open, slip your glasses in, and snap it closed.

 

EYE GLASS CHARM SEWING PATTERN FREE

 

And when it comes to sewing, this is one of the easiest projects you can try, especially if you’re a beginner sewist. Just a few fabric circles, a few simple stitches, and you’ll have this quick and easy eyeglass charm ready in no time.

EYE GLASS CHARM SEWING PATTERN FREE

 

EYE GLASS CHARM SEWING PATTERN FREE

 

Make one, pop your glasses inside, snap it closed, and hang it outside your bag. No more digging around in your handbag—your glasses will always be right where you can reach them!

Easy Eyeglass Charm Sewing Pattern

Supplies Needed:

Medium weight cotton fabric for the eyeglass charm front – 1/4 yard (you may use fat quarters instead.

Medium weight cotton fabric for the  eyeglass charm lining- 1/4 yard- ( you may use fat quarters instead

Batting- 1/4 yard.

1/2- inch wide grosgrain ribbon in a matching color- 16″

KAM snaps in a matching color- 1 set

Sewing Notions.

Pattern Template. **Enter your email address and click the subscribe button in the blue box below to download the template. Kindly wait for 2 to 3 minutes for the download window to appear.

 

 

Gather your supplies.

 

Take the fabric for the outer and cut the outer piece on the fold, using the template. Repeat the same to get the batting and lining pieces.

 

Your pieces will look like this.

 

Place the outer piece on top of the batting, with the right side facing up, aligning the edges. Fold the strap in half and place it along the edge of the outer piece. Place clips to hold.

 

Place the lining above the layer, with the right side facing down and lining up the edges. Place clips along the edges to hold.

 

Sew around the edge to join the pieces, leaving about 2- inches open to turn the right side out.

 

Clip the edges to reduce the bulk in the seam.

 

Pull the right side out through the opening.

 

Tuck the raw edges of the opening in and press to set.

 

Topstitch all around the circle to sew the opening shut and to make it clean and crisp.

 

Attach the KAM snaps on the opposite edges as shown above, following the instructions in the manual.

 

Snap the KAM snaps together and your eyeglass holder is done and easy!

Pin it for later here,

EYEGLASS CHARM SEWING PATTERN FREE (1)

 

Sharing is caring!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *