1
2
Cut the burlap twine a little longer (about 3 to 4 inches extra) on either side of the tube you are taking. Leaving the extra on either sides, tape the twine to the ends of the tube or you may alternatively hotglue it.
3
Take the remaining twine roll and glue the end to the end of the tissue tube. Start winding the twine around the tube, not too loose or not too tight ( just right enough to easily remove it from the tube, once it is wound fully). Make sure to keep the strands as close to each other as possible.
4
5
Remove the taped ends of the twine piece beneath. Carefully push the strands out, from the left end. You can see the burlap twine rings coming out on the other side.
5
1
2