Kid's Reversible Cape Sewing Pattern with Hood

SEWCRAFTYME.COM

WITH FREE TEMPLATE

let's make it

Take two pieces from the cape fabric and layer them. Fold them aligning the edges. Mark the cape length from the top corner by the black point.

Move the tape and keep it at the same corner, but the other end of the tape a little away from the first point and again mark the cape length. Again move the tape a little away from the second point and mark the third point

Repeat the steps to get one more point and finally the last point along the edge as shown above.

Cut the template for the neckline and keep the template on the fold as shown above. Mark it as shown by the black line.

Connect the lower points also by a line; you will get a curved line. Now you have two curved lines; one marked by the template and another large one at the lower part of the fabric.

Cut along the two curved lines. Discard the fabric outside the smaller and larger curves. Now you get your two cape pieces; front and back

Grab the full tutorial via link below